Configuration guide

Node Signs

Spell words and build 3D shapes out of real stone, metal and sulfur nodes, from the website or with a Discord command. This page covers every option, limit and the Clear nodes tool.

Time
8 minutes
You need
Manage Server (website) or staff roles (Discord)
Applies to
Per Rust server

Overview

Node Signs places real ore nodes on the map to make a sign or a shape. You can print text (up to four lines, each with its own material), build a 3D preset such as a car or a house, or clear every node on the map. The same tool is on the website and in Discord as /node-sign.

Nodes are real. Players can mine them, so a sign shrinks as it is mined and is gone after a server wipe.

Careful

Clear nodes removes every stone, metal and sulfur node on the map, including the natural ones. The server puts the natural nodes back about 5 seconds later. It cannot be undone.

Setup & Configuration

There is nothing to switch on. You need a Rust server connected over RCON, and you must be linked and online on that server, because the bot finds where you stand.

Log in to the RustyWorks website, open Servers Configure, pick your server and select Node Signs

On the website

On the website

  1. Pick the server

    Choose the Rust server to build on.

  2. Set your position

    Stand where you want the build, then type your in-game name and press Use my position. The X, Y and Z boxes fill in. You can also type them by hand.

  3. Choose a tab

    Use Text sign, 3D presets or Clear nodes (the three sections below).

  4. Build

    Check the preview, node count and time, then press Build. A progress bar shows how many nodes have been placed. You can leave the page and building carries on.

In Discord

In Discord

Run /node-sign and choose the server. The wizard offers Node Signs, Node Pre-sets and Remove Nodes. It reads your position when you confirm each build. Staff only.

Text sign

Setting What it does Limits and default
Lines The text, one row per line, each with its own material Up to 4 lines (website), 24 characters each. Discord takes one line of up to 30 characters
Material Stone, Metal, Sulfur or Mixed (a random ore for each node) Default Stone
Scale Makes every letter bigger. Letters are 5 nodes tall at 1x 1 to 5. A bigger scale uses far more nodes (2x uses 4 times as many, 3x uses 9 times)
Line alignment Left, centre or right Default centre
The sign is read from the The side of the sign you read it from: North, South, East or West Default South. It is never mirrored
Distance in front of you How far ahead of your position the sign is built In metres. Default 4
Raise the sign Lifts the sign above your feet In metres. Default 0

The preview shows the sign and its size, node count and estimated time. One sign can use at most 20,000 nodes. Past that the website refuses to build.

3D presets

Pick a blueprint card, then a scale from 1x to 5x. The page shows the node count, the size in metres and the estimated time.

Blueprint What it is
Small Box, Car, Truck Small shapes. Good for a first try
Helicopter, Plane (Small and Large) Aircraft
Boat (Small, Medium, Large) Boats
House (Small and Large) Buildings
Rocket Ship A rocket
Radiation Sign A wall sign
  • A wall blueprint (such as the Radiation Sign) stands upright about 2 metres in front of you.
  • A ground blueprint starts about 5 metres in front of you and rises upward. Stand on flat ground with room around you.
  • Each scale step multiplies every dimension, so 2x uses 8 times the nodes and 3x uses 27 times. One build can use at most 40,000 nodes.

Clear nodes

Press Clear all nodes and confirm. The bot deletes all stone, metal and sulfur nodes, waits about 5 seconds, then asks the server to refill its natural nodes. This job cannot be stopped once it starts.

Speed and stopping

Large builds take time. The bot places roughly 12 nodes a second, and the page shows an estimate. Press Emergency stop to halt a text or preset build after the current batch. Nodes already placed stay until you use Clear nodes.

Only one job can run per server at a time.

Commands & Usage

Command What it does Who can use it
/node-sign Opens the Node Printing Wizard for a server Staff roles

Troubleshooting

Problem Cause Fix
"Use my position" cannot find me You are not online, or still in the queue Join the server, load in fully, then try again
The build button is greyed out or refused The build is over the node limit Lower the scale or shorten the text
"A job is already running" Another build or clear is still going on that server Wait for it, or press Emergency stop
The sign is mirrored or on the wrong side The reading side is set wrong Pick the side you will stand on to read it
Part of the sign is missing Players mined it, or the server dropped commands Clear nodes and build again
Nodes came back after Clear Natural nodes are refilled about 5 seconds later by design This is expected. Your sign is gone

Checked against RustyWorks on 9 Nov 2026.

Stuck on this step?

Tell us which setting you are on and what the bot said, and paste a screenshot if you can. Staff in the support Discord can usually fix it in a minute.