Configuration guide

New Player Protection

Give brand-new players a short raid shield on their first Zorp. Set the window, the protection time, the colour and manage the player list. This page covers every setting.

Time
5 minutes
You need
Manage Server (website) or Owner, Co-Owner, Head Admin (Discord)
Applies to
Per Rust server

Overview

A new player's first Zorp gets a temporary raid shield. They create it the normal way and learn nothing extra. The base cannot be raided for the protection time, even while the owner is online. When time is up the Zorp stays and becomes a normal Zorp. It works once per player.

There are no commands of its own. It is part of Zorps.

Before you start
  • Zorps must be on (Zorps).
  • The Join/Leave Feed must be on, because the bot reads the player's first join time from it (Join/Leave Feed).
  • The player must still meet the normal Zorp rules: clan or team leader, no overlap.

Setup & Configuration

On the website
  • Log in to the RustyWorks website, open Servers Configure, pick your server and select Clans & Zorps, open the Zorp System tab, then find New Player Protection.
In Discord
  • Run /zorp config and press New Player Protection.

Settings

Setting What it does Limits and default
Enable New Player Protection Turns it on. Protections already running are not affected when you turn it off Off
Tell new players in game Sends one in-game message the first time the bot sees a new player
Time to create the Zorp (hours) How long after first join a new Zorp still gets the shield 1 to 168. Default 24
Protection time (hours) How long the base is protected 1 to 72. Default 6
Zone colour while protected (RGB) Set apart from the normal Zorp colours Default 0,170,255

Press Save New Player Protection.

Players list

Every player who has had protection, newest first.

Button What it does
End now Ends the protection. The Zorp becomes normal within about 30 seconds
Let a Player Use It Again Gives the use back. Delete their old Zorp first

Notes

  • After a wipe nobody counts as new, because the bot keeps each player's first join time.
  • Deleting a Zorp while it is protected counts as the use being spent.
  • The page warns you if Zorps are off, or if the Join/Leave Feed is off.

Troubleshooting

Problem Cause Fix
"Zorps are switched off for this server" New Player Protection needs the Zorp system Turn on Enable Zorps and save
"The Join/Leave Feed is off" The bot cannot see first join times Turn the feed on
A new player gets a normal Zorp The window passed, or they already used it Check the window, or use Let a Player Use It Again

Checked against RustyWorks on 29 Oct 2026.

Stuck on this step?

Tell us which setting you are on and what the bot said, and paste a screenshot if you can. Staff in the support Discord can usually fix it in a minute.