Configuration guide

Recycler Manager

Turn recycling on or off, set the recycle speed and warm-up time, and add recyclers to monuments. Changes are sent live over RCON. This page covers every control.

Time
5 minutes
You need
Manage Server (website) or Owner, Co-Owner, Head Admin (Discord)
Applies to
Per Rust server

Overview

The Recycler Manager changes recycler settings on the server while it is running. Every change applies instantly, with no wipe or reboot.

Before you start
  • Your server's RCON must be connected (Server Setup).
  • Rust does not report current values back over RCON, so the boxes are write-only. They send the value you type.

Setup & Configuration

On the website
  • Log in to the RustyWorks website, open Servers Configure, pick your server and select Recycler Manager. Pick your server.
  • A banner shows whether RCON is connected and how many monument recyclers are enabled.
In Discord
  • Run /recycler and pick the server.

Global recycler settings

Setting What it does Limits and default
Enable Recycling / Disable Recycling Turns recycling on or off across the whole server. When off, players cannot use any recycler
Recycle Speed (seconds per item) Lower is faster. Press Apply Speed 0 to 600. Rust default 5
Warm-up Time (seconds) Delay before a recycler starts after being switched on. Press Apply Warm-up 0 to 600. Rust default 5

Monument recyclers

Choose which monuments get a recycler.

Monument
The Dome
Large Fishing Village, Small Fishing Village
Large Oil Rig, Small Oil Rig
Stables (Large Barn) and Ranch
Cargo Ship
Button What it does
Enable Adds the recycler from the next map spawn
Disable Stops spawning one. Existing recyclers stay until the next map spawn
Spawn Now Places one immediately without waiting for a wipe. It can be a little unstable

All server configs

Fetch All Configs shows a raw list of every monument config the server knows, not only recyclers.

Keeping recyclers after wipes

In Discord, Boot Instructions gives you the commands to paste into your host's Custom Boot Commands, so recyclers stay after a wipe.

Commands & Usage

Command What it does Who can use it
/recycler Opens the recycler menu Owner, Co-Owner, Head Admin

Troubleshooting

Problem Cause Fix
"Enter a value between 0 and 600 seconds" The number is out of range Use 0 to 600
"No RCON response" The server is offline or restarting Try again when it is back
A monument recycler does not appear Enable only applies from the next map spawn Use Spawn Now

Checked against RustyWorks on 29 Oct 2026.

Stuck on this step?

Tell us which setting you are on and what the bot said, and paste a screenshot if you can. Staff in the support Discord can usually fix it in a minute.