Configuration guide

Wipe Schedule & Updates

Post an auto-updating wipe countdown, send wipe announcements, and run automatic resets while your server restarts. This page covers the schedule, Wipe Updates and the wipe day script.

Time
15 minutes
You need
Manage Server (website) or Owner, Co-Owner, Head Admin (Discord)
Applies to
Per Rust server

Overview

There are three parts, and you can use any of them.

Part What it does
Wipe Schedule Posts an embed that counts down to the next wipe and rolls forward by itself
Wipe Updates Posts countdown announcements and runs automatic resets while your server restarts
Wipe day script Runs the same clean-up by hand with /wipe-day
The bot never wipes your server

The schedule is a display tool. It never restarts the server, wipes the map or clears player data. Your hosting provider does that.

Before you start
  • Wipe Updates needs a saved Wipe Schedule first.
  • Pick channels the bot can post in. To ping a role, the role must be mentionable, or the bot needs Mention Everyone for @everyone.
  • Zorp auto switching and several resets need the Join/Leave Feed (Join/Leave Feed).

Setup & Configuration

On the website
  • Log in to the RustyWorks website, open Servers Configure, pick your server and select Automated Wipe Schedule. Pick your server.
  • The page has Schedule and Wipe Updates.
In Discord
  • Run /wipe config with a channel to save the schedule. Run it without a channel to open the Wipe Updates panel.

Schedule

Setting What it does Limits and default
Announcement Channel Where the auto-updating embed lives. Required
Wipe Interval Weekly (7 days), Bi-Weekly (14 days) or Monthly (4 weeks)
Next Wipe Date The date of the next wipe
Wipe Time (24hr) The time of the wipe
Timezone Offset Hours from UTC, for example 1 or -5 -12 to 14, half hours allowed
Wipe Rotation A comma list such as Map Wipe, Map + BP Wipe, BP Wipe. The bot cycles through it, one per wipe At least one entry. Up to 255 characters
Currently On Which entry the next wipe uses. Handy when setting up mid-cycle

The embed shows the next wipe and the three after it in each reader's own timezone. When a wipe time passes the bot moves to the next date and the next rotation entry by itself. Press Save & Post Schedule. Delete Schedule removes the embed and stops the countdown.

If the date is in the past, the page asks before saving, because the bot rolls it forward and may skip rotation entries.

Wipe Updates

Off by default. Switch it on, then press Save Wipe Updates.

Setting What it does
Updates channel Where announcements go. It can differ from the schedule channel
Default role to ping Used by every announcement set to "Default role"
Each announcement On or off, a preset or your own title and message, and its own ping

The announcements:

Announcement When it posts
3 days, 2 days, 1 day Before the wipe
60, 30 and 15 minutes Before the wipe
Wipe in Progress At the wipe time
Wipe Completed After the server is back

For each one you can set:

Option Limits
Title Up to 100 characters
Message Up to 1,500 characters
Ping Default role, a specific role, no ping or @everyone

You can use these tags in your text: {server}, {wipe}, {date}, {relative}, {next_wipe} and {next_date}. The wipe type and date are added under your text automatically. Preview shows the result, and Send test posts it to the updates channel with a test label and pings nobody.

Automatic resets

These run while your server restarts. All are on by default.

Reset What it does
Zorps Deletes every Zorp
Admin zones Deletes admin zones
Teleport cooldowns Clears teleport cooldowns
Homes Deletes saved homes
Catch-A-Ride Clears vehicle cooldowns
Kit cooldowns Clears kit claims
Kit lock Locks kits for a set time after the server is back. Default 120 minutes, up to 10,080

They run after every wipe in your rotation, including blueprint-only wipes.

How a wipe plays out

  1. At the wipe time the bot posts Wipe in Progress.
  2. You restart the server with your host.
  3. The bot sees the connection drop and runs the resets.
  4. When RCON has been connected for 45 seconds it posts Wipe Completed, with a tick or cross for each reset and the next date.

Wipe Updates pause themselves, and tell you, if the server has been offline for more than 30 minutes at wipe time. They also stop if you delete the schedule or switch them off.

Wipe day script

If you are not using Wipe Updates, run /wipe-day by hand once the server is back online. Pick the tasks, then Execute.

Task What it does
Zorps Deletes every Zorp, including admin zones
Teleports Clears cooldowns and homes, and re-finds Outpost and Bandit Camp
Catch-A-Ride Clears every vehicle cooldown
Kits Clears all kit claims. You can add a lockout of 0 to 10,080 minutes
Timed Events Refreshes the Launch Site coordinates

Commands & Usage

Command What it does Who can use it
/wipe config Saves the schedule, or opens Wipe Updates when no channel is given Owner, Co-Owner, Head Admin
/wipe-day Runs the clean-up tasks by hand Owner, Co-Owner, Head Admin

Troubleshooting

Problem Cause Fix
"Pick an announcement channel" or "Enter at least one wipe type" A required field is empty Fill it in
"No schedule yet" in Wipe Updates Updates follow the saved schedule Save the schedule first
Announcements did not ping The role is not mentionable, or @everyone lacks permission Make the role mentionable, or give the bot Mention Everyone
Wipe Updates switched themselves off The server was offline for over 30 minutes at wipe time Turn them back on once it is running
"Wipe Completed" never posted RCON did not reconnect The bot gives up after 12 hours and posts a notice

Checked against RustyWorks on 29 Oct 2026.

Stuck on this step?

Tell us which setting you are on and what the bot said, and paste a screenshot if you can. Staff in the support Discord can usually fix it in a minute.