Configuration guide

Server Management

Change gather rates, smelting, decay, sleeping bags, PvP and more on your Rust server from the website, and press quick-action buttons for events and clean-ups. This page lists every setting with its range and default.

Time
10 minutes
You need
Owner, Administrator or Manage Server, a linked Rust server
Applies to
Per Rust server

Overview

Server Management sends settings straight to your Rust server over RCON. Pick a server, change a value, press Save, and the bot sends the matching server command at once. There is nothing to restart. Rust forgets most of these values when the server restarts or wipes, so the bot also sends everything you saved again by itself (see After a restart or wipe).

The page also shows live server stats (players, entity count, uptime, framerate and memory) and a set of quick-action buttons for calling in events and clearing the map.

Before you start
  • Add the server first under Server Setup so the bot has its RCON details.
  • Every value you save is remembered, so the page shows what you last set. Rust does not report most of these values back, so the page cannot read the server's real value. It shows your last saved one.
  • Recycler on or off, recycler speed and monument recyclers are not on this page. They live in Recycler Manager.

Setup & Configuration

On the website
  • Log in to the RustyWorks website, open Servers Configure, pick your server and select Server Management.
  • Choose the server in the Server menu at the top.
  • Open a section, check its On/Off switch, change a value, then press its Save button. Menus (PvP, Building damage, Demolish Hammer) save the moment you pick a choice.
  • Tick Auto-refresh stats if you want the live stats to keep updating.
In Discord
  • There is no Discord version of this page. Everything on it is set from the website.
Restarts and wipes

Rust forgets most of these values when the server restarts or wipes. You do not need to press Save again: the bot sends everything you saved once the server is back. How it works

How saving works

  1. Number boxes show your last saved value. An empty box means you have never set it. The grey placeholder is the default.
  2. If you type a number outside the range, the page tells you the allowed range and does not send anything.
  3. Menus have a Disabled choice. Disabled sends no command, leaves that setting alone, and is not re-applied after a restart.
  4. A green badge on a section title shows how many settings in it are active.
  5. If the server does not answer when you press Save, the value is still saved. The page says so, and the bot sends it when the server reconnects.
  6. If the section is switched off, the value is saved but not sent. See Turning a section on or off.

Turning a section on or off

Every section has its own On/Off switch in its title bar. This lets you fill a section in ahead of time and only send it to the server when you are ready.

  • Off: what you type and save is kept, but nothing in that section is sent to the server. That includes the moment you press Save and every time the server reconnects. The server keeps whatever values it has now until it restarts.
  • On: the bot sends everything saved in that section straight away, then again after every restart or wipe. If the server does not answer, the rest is sent when it reconnects.
  • A grey Off badge on the section title shows it is switched off. A section that is on shows its green count of active settings.
  • Every section starts Off. Switch on only the ones you want the bot to manage. A server that already had settings saved before the switches existed stays untouched until you switch each section on.
  • Switching a section off does not put the server back to normal. To do that, switch it on, save each default, then switch it off.

World & Base Settings

Server-wide toggles and countdown timers.

Setting Choices What it does
Player vs Player Disabled (default), PvP Mode, PvE Mode Controls whether players can deal direct damage to each other. Disabled sends nothing and leaves the server as it is.
Player vs Building Disabled (default), Full Base DMG, No Base DMG Controls whether players can damage other players' buildings. Disabled sends nothing and leaves the server as it is.
Setting Range Default What it does
Cargo Plane Limit 0 to 200 50 Max simultaneous cargo planes.
Bradley APC Respawn 0 to 1440 60 Minutes between Bradley respawns.
Code Lock Countdown 0 to 9999 900 Seconds required to hack a locked crate.

Turret Settings

Auto-turret placement rules.

Setting Range Default What it does
Turret Radius 0 to 500 40 How close two Auto Turrets need to be before they start counting against each other's limit below.
Turret Limit 0 to 100 12 How many other turrets are allowed within one turret's radius (above) before it refuses to deploy a new one.

Demolish Hammer

How long a block stays demolishable, and whether the hammer can force-demolish at any time.

Setting Choices What it does
Demolish Hammer Disabled (default), Demolish Hammer On, Demolish Hammer Off Controls whether a hammer can instantly demolish any building block for a full refund, at any time. Disabled sends nothing and leaves the server as it is.
Setting Range Default What it does
Demolish Hammer Time 0 to 99999 600 How long after a building block is placed that it can still be demolished for a full refund with a hammer.

MLRS

How long an MLRS stays broken down for after firing.

Setting Range Default What it does
MLRS Breakdown Time 0 to 60 Not set How many minutes an MLRS module stays broken down (unusable and needing repair) for after it's fired, before it can be used again.

Gather Scale

Amount collected from nodes, trees and cloth.

Setting Range Default What it does
Wood 1 to 3 1 Multiplies how much wood you get per hit chopping trees or hitting wood with a tool.
Stone 1 to 3 1 Multiplies how much stone you get per hit mining stone nodes/rocks.
Metal 1 to 3 1 Multiplies how much metal ore you get per hit mining metal nodes.
HQM Metal 1 to 3 1 Multiplies how much High Quality Metal ore you get per hit on HQM nodes.
Sulfur 1 to 3 1 Multiplies how much sulfur ore you get per hit mining sulfur nodes.
Cloth 1 to 3 1 Multiplies how much cloth you get from hemp plants and skinning animal corpses.

Smelting Scale

Smelting/cooking speed for the chosen ore.

Setting Range Default What it does
Metal 1 to 10 1 How fast a furnace smelts Metal Ore into Metal Fragments.
HQM Metal 1 to 10 1 How fast a furnace smelts HQM Ore into High Quality Metal.
Sulfur 1 to 10 1 How fast a furnace smelts Sulfur Ore into Sulfur.

Yield Scale

Multiplier on cooked items produced by furnaces.

Setting Range Default What it does
Metal 1 to 3 1 Multiplies how many Metal Fragments come out per smelt cycle, on top of the smelt speed above.
HQM Metal 1 to 3 1 Multiplies how much High Quality Metal comes out per smelt cycle.
Sulfur 1 to 3 1 Multiplies how much Sulfur comes out per smelt cycle.

Industrial Scale

Conveyor and industrial crafter throughput.

Setting Range Default What it does
Conveyor Move Speed 0.25 to 50 5 How often conveyors attempt to move items, in seconds.
Conveyor Move Stack 1 to 9999 12 How many items a single conveyor can move in one tick.
Crafter Speed 0.25 to 50 5 How often industrial crafters attempt to craft, in seconds.

Tool Multipliers

Multiplier applied per tool used to harvest.

Setting Range Default What it does
Rock 1 to 3 1 Extra gathering multiplier when harvesting with a bare Rock (the starting tool).
Stone Pickaxe 1 to 3 1 Extra gathering multiplier for the Stone Pickaxe specifically, stacked on top of the resource's gather rate.
Stone Hatchet 1 to 3 1 Extra gathering multiplier for the Stone Hatchet specifically, stacked on top of the resource's gather rate.
Pickaxe 1 to 3 1 Extra gathering multiplier for the (metal) Pickaxe specifically, stacked on top of the resource's gather rate.
Hatchet 1 to 3 1 Extra gathering multiplier for the (metal) Hatchet specifically, stacked on top of the resource's gather rate.
Salvaged Icepick 1 to 3 1 Extra gathering multiplier for the Salvaged Icepick specifically, stacked on top of the resource's gather rate.
Salvaged Axe 1 to 3 1 Extra gathering multiplier for the Salvaged Axe specifically, stacked on top of the resource's gather rate.
Salvaged Hammer 1 to 3 1 Extra gathering multiplier for the Salvaged Hammer specifically, stacked on top of the resource's gather rate.
Jackhammer 1 to 3 1 Extra gathering multiplier for the Jackhammer specifically, stacked on top of the resource's gather rate.
Chainsaw 1 to 3 1 Extra gathering multiplier for the Chainsaw specifically, stacked on top of the resource's gather rate (mainly affects wood).

Farming Modifiers

Plant growth speed and heater/light/sprinkler coverage radius.

Setting Range Default What it does
Heater Range 1 to 1000 4 Smaller = more heaters needed around plants.
Light Range 1 to 1000 3 Smaller = more lights needed around plants.
Sprinkler Range 1 to 1000 3 Smaller = more sprinklers needed around plants.
Faster Growth Speed 1 to 1000 1 Multiplies how fast every planted crop moves through its growth stages, server-wide.

Other Modifiers

Fuel efficiency, furnace behaviour, charcoal and quarry output.

Setting Range Default What it does
Low Grade Fuel Efficiency 1 to 3 1 Multiplies how much Low Grade Fuel is used per tick by Lights and Chainsaws.
Oil Refinery Fuel Efficiency 1 to 3 1 Multiplies how much Crude Oil an Oil Refinery needs to produce a batch of Low Grade Fuel.
Furnace Cook Speed 0.1 to 3 1 3 = furnaces cook 3x quicker while active.
Furnace Efficiency (Wood Use) 0.1 to 3 1 Currently sends the same game command as Oil Refinery Fuel Efficiency, so the two share one value and saving either one overwrites the other. After a restart only Oil Refinery Fuel Efficiency is sent again, and the page lists Furnace Efficiency as not re-applied. Leave it at 1 unless you want both to change together.
Furnace Output 1 to 3 1 3 = furnaces produce 3x more items while active.
Charcoal Production 1 to 3 1 Relative amount of charcoal produced as a smelting/furnace by-product.
Quarry Production Speed 1 to 3 1 3 = quarries work 3x quicker while active.

Sleep Management

Sleeping bag limits, range and reuse timers.

Setting Range Default What it does
Sleeping Bag Limit 0 to 999 15 Max number of sleeping bags a single player can have placed and active at the same time, server-wide.
Sleep Bag Range 0 to 999 50 Radius around a sleeping bag/bed that gets cleared of obstructions when someone spawns on it, so they don't get stuck in a wall or terrain.
Sleep Bag Timer 0 to 9999 300 Cooldown in seconds before the same sleeping bag can be used to respawn on again after last being used.
Bed Timer 0 to 9999 300 Cooldown in seconds before the same bed can be used to respawn on again after last being used.

Decay Management

Despawn timers and base upkeep.

Setting Range Default What it does
Item Despawn Timer 0 to 9999 60 How many seconds a dropped item sits on the ground before it despawns — for example items dropped from a full inventory or a broken container.
Corpse Despawn Timer 0 to 9999 300 How many seconds a player or animal corpse stays in the world before despawning, taking whatever loot is still inside it with it.
Base Upkeep 0 to 99999 1440 Higher = less upkeep needed.

Trains

Above- and below-ground trains. This section starts Off: switch it on to send these settings.

Setting Choices What it does
Above-Ground Rails Disabled (default), Rails On, Rails Off Whether the above-ground train rails are enabled.
Kill Off-Track Train Cars Disabled (default), Yes - kill them, No - keep them Whether train cars that are not spawned near train tracks are killed instantly.
Setting Range Default What it does
Train Population 0 to 20 2.3 How many trains spawn on the map. 0 = none.
Wagons Per Engine 0 to 20 2 How many wagons spawn for each train engine.
Train Car Despawn Time 1 to 10080 Not set How many minutes before a train car despawns.
Despawn After Unloading 0 to 1440 10 How many minutes an unloadable train car stays before it despawns once it has been unloaded.
Max Coupling Speed 0 to 100 9 The fastest speed at which a wagon will still couple onto another.
Train Turret Inaccuracy 0 to 10 0.1 How inaccurate the train turrets are, per unit of train speed. Higher = they miss more while the train is moving.

Travelling Vendor

Whether the Travelling Vendor spawns, how long it stays and how it drives. This section starts Off.

Setting Choices What it does
Travelling Vendor Spawns Disabled (default), Spawns, Does not spawn Whether the Travelling Vendor spawns at all.
Vendor Pulls Over Disabled (default), Pulls over, Does not pull over Whether the Travelling Vendor tries to pull over to the side of the road.
Vendor Destroys Buildings Disabled (default), Destroys buildings, Leaves buildings alone Whether the Travelling Vendor destroys buildings that are in its way.
Setting Range Default What it does
Vendor Stays For (seconds) 10 to 86400 1800 How many seconds the Travelling Vendor stays on the map. 1800 = 30 minutes.
Vendor Top Speed 0.1 to 50 5 How fast the Travelling Vendor drives.
Ranges

Rust does not publish limits for the train and vendor settings, so the ranges above are safe limits chosen for this page. The defaults are the Rust defaults. "Not set" means the page has no default to show.

Quick actions

Quick actions run one command on the server straight away. Buttons marked Yes ask you to confirm first, because they cannot be undone.

Button What it sends Asks you to confirm
Call In Patrol Helicopter Spawns a Patrol Helicopter immediately, same as if it triggered naturally. No
Call In Chinook Spawns a Chinook 47 that flies in and drops a Locked Crate, same as a natural spawn. No
Call In Airdrop Triggers a supply drop plane that flies over and drops a supply signal crate by parachute. No
Call In Cargoship Spawns the Cargo Ship event immediately if one isn't already active. No
Delete Code Locked Crates Deletes every currently-spawned Hackable Locked Crate on the map (the ones dropped by Chinook/heli). Yes
Reset Monuments & Scientists Re-runs monument population — respawns scientists and loot spawn groups that have been killed/looted, without a full map wipe. Yes
Reset Puzzle Monuments Resets every puzzle monument (for example Sewer Branch, Water Treatment key card puzzles) back to its unsolved state, undoing any progress players have made. Yes
Kill All Scientists Instantly kills every scientist NPC on the map. Yes
Kill All Animals Instantly kills every wild animal on the map (bears, wolves, boars, deer, etc). Yes
Delete All Cars Deletes every modular/sedan car on the map, including ones players own and have parked or stored items in. Yes
Delete All Motorbikes Deletes every motorbike on the map, including ones owned by players. Yes
Delete All Pedal Bikes Deletes every pedal bike on the map, including ones owned by players. Yes
Delete All Junkpiles Deletes every junkpile (the small loot piles found on land and underwater), clearing that loot from the map until they respawn. Yes
Delete All Divesites Deletes every underwater dive site, clearing that loot from the map until they respawn. Yes
Delete buttons also remove player-owned things

Delete All Cars, Motorbikes and Pedal Bikes remove vehicles that players own, including any items stored in them. Tell players before you press one.

After a restart or wipe

Rust forgets most of these values when the server restarts or wipes. The bot remembers what you saved on this page and sends it to the server again by itself.

  • When: every time the bot's connection to the server comes back. That covers a restart, a wipe, a crash, and the bot itself restarting. A connection that only drops for a moment, with the server still running, sends nothing again.
  • What is sent: every menu that is not Disabled, and every number you have saved, even one saved at its default, in every section that is switched On. Numbers you never saved are left alone, and so is any section that is switched Off. The quick-action buttons are never repeated.
  • How long it takes: the bot waits until the server reports that its map has loaded, checking every 10 seconds, then sends the settings one at a time. If the server never reports it, the bot sends them after 10 minutes anyway. A server with nothing saved is never touched.
  • What you do: nothing. You do not press Save again.

The yellow notice near the top of the page shows it working. It says how many saved settings will be re-applied, how many are held back because their section is switched off, and when the bot last did it, for example "Last re-applied 5 min ago: 3 of 3 sent".

Stopping a setting from coming back

  • Set a menu back to Disabled.
  • A number cannot be switched off. To put it back to normal, save its default value (the grey placeholder). The default is then what is sent after a restart.
The server's own settings

Whatever the bot sends overrides what your host or the server's own config file says, until you change it here. If a value on this page and your host's setting disagree, this page wins after every restart.

Live stats

The panel shows Players, Entity Count, Server Uptime, Framerate and Memory Used. Press Refresh Stats to update it, or tick Auto-refresh stats.

Troubleshooting

Problem Cause Fix
"No RCON response" on the stats panel The server is offline, restarting, or the RCON details are wrong Check the server is running, then check its IP, port and password in Server Setup
"No Rust servers found" No server has been added Add one in Server Setup first
"Enter a value between X and Y" The number is outside the allowed range Use a value inside the range shown in the tables above
A setting went back to normal after a restart The bot has not re-applied it yet. It waits for the server's map to finish loading, which can take a few minutes Wait a few minutes, then read the "Last re-applied" line in the yellow notice. If it says "Not re-applied yet" or shows fewer sent than saved, press Save on the setting again
"Last re-applied" shows fewer settings sent than saved The server stopped answering partway through, for example it restarted again or crashed Check the stats panel shows the server online. The next reconnect tries again from the start
"Not re-applied: Furnace Efficiency" in the yellow notice Furnace Efficiency and Oil Refinery Fuel Efficiency send the same game command Only Oil Refinery Fuel Efficiency is re-applied. Leave Furnace Efficiency at 1
I saved a value, the page said "switched off", and nothing changed in game The section's On/Off switch is Off, so the value was kept but not sent Switch the section on. The bot then sends everything saved in it
The yellow notice says "held back because their sections are switched off" Some saved settings are in sections that are Off Nothing is wrong. Switch the section on when you want them sent
Save says "The server did not answer" The bot could not reach the server at that moment Nothing to do. The value is saved and is sent when the server reconnects. You can also check the stats panel shows the server online and save again

Checked against RustyWorks on 30 Oct 2026.

Stuck on this step?

Tell us which setting you are on and what the bot said, and paste a screenshot if you can. Staff in the support Discord can usually fix it in a minute.